Tips about hot melt adhesive usage

No 1: Relevant safety measures

       Before using hot melt adhesive, we should understand some basic safety measures to avoid accidental injury. First of all, you should wear anti-heat gloves to avoid burning your skin. Secondly, avoid direct contact with the eyes, so as not to cause eye damage. In addition, when using hot melt adhesive, flammable items should be left to prevent fire accidents.
The reason for these safety measures is that hot melt adhesive will reach high temperatures during use, which may cause burns to the human body. Hot melt glue in the melted state is very viscous, once contact with the eye may adhere to the eyeball, causing irritation and injury. In addition, high temperature hot melt adhesive contact with flammable materials may cause fire.

No.2: Correct operation procedures

       When using hot melt adhesive, we should follow the correct operating steps. First, plug the hot melt glue gun into the power supply and preheat it for a few minutes until the hot melt is completely melted. Then, insert the hot melt strip into the hot melt glue gun and wait a few seconds to a few minutes until the hot melt glue flows out of the nozzle. Finally, the hot melt glue is applied to the surface that needs to be bonded, and the bonding job is quickly completed before the glue sets.
The reason for these steps is that preheating the hot melt glue gun ensures that the glue is completely melted for a better bonding effect. Inserting the hot melt strip and waiting for a while allows the glue to flow smoothly out of the nozzle, making it easy to operate. At the same time, completing the adhesive work quickly before the glue is fully cured can ensure the stickiness and bond strength of the glue.

No.3: Storage and cleaning

       After using hot melt adhesive, we should pay attention to the problem of storage and cleaning. First, remove the unused hot melt strip from the hot melt glue gun and store it in a dry environment. Secondly, the hot melt glue gun should be turned off immediately after the use of hot melt glue and unplug the power to avoid accidents. Finally, when cleaning the hot melt glue gun, wait for it to cool before using paper towels to wipe the glue residue.
The reason for these storage and cleaning points of attention is that hot melt strips are easy to melt at high temperatures and may lead to deterioration if exposed to air for a long time. Turning off the hot glue gun and unplugging it ensures safety and prevents the glue from flowing out unnecessarily. When cleaning the hot melt glue gun, waiting for it to cool can avoid burns, and wiping the glue residue can keep the hot melt glue gun clean and in normal working condition.

     By paying attention to the above points, we can use hot melt adhesive more safely and effectively. Remember, hot glue is a useful tool, but it also requires attention to safety and proper use. Sometimes it is not the product is not good, but the use of improper oh ~ Hope this article can help you ~